CRJ 65 Lb. Hanging Hardware
The CRJ hanging hardware, by Arakawa, works exactly the same way as the CRE hardware, except that it is rated at 65 lbs. per cable instead of 40. So, with two cables for each piece of art, you could hanging one piece that is 130 lbs. or two pieces of 65 lbs. each per set of cables. Generally, a heavier piece of art will, by definition, be large. Things such as large mirrors (24 x 36 or bigger) would also work realy well with CRJ-rated hardware.
This grouping of hardware consists of:
CRJ hanging rail, available only in 72" lengths, but can be cut down to size by us or by you with a hacksaw or miter saw (see photo far left).
CR1 Rail Clip, which inserts at any point on the rail and then locks in place with a simple 90 degree twist (2nd photo from left).
AF3P116SS Picture Hook, which is designed to hangle 1/16" cable, but will also handle the 3/64" cable used in the CRE hardware configuration for 40 lbs.(2nd from right photo).
1/16" Stainless Steel, braided, pre-cut cables (far right photo).
Below is a picture of the above-mentioned hardware: